// CODE SNIPPET
(5) Automatic Controls
Go To Full Code Chapter
Electrostatic apparatus shall be equipped with automatic means that will rapidly de-energize the high-voltage elements under any of the following conditions:
- Stoppage of ventilating fans or failure of ventilating equipment from any cause
- Stoppage of the conveyor carrying goods through the high-voltage field unless stoppage is required by the spray process
- Occurrence of excessive current leakage at any point in the high-voltage system
- De-energizing the primary voltage input to the power supply
Upcodes Diagrams
Related Code Sections
513.12.4 Exhaust Systems, Automatic Control
Where complete automatic control is required or used, the automatic control sequences shall be initiated from an appropriately zoned automatic ...
(5) Special Occupancies, Automatic Controls
Electrostatic apparatus shall be equipped with automatic means that will rapidly de-energize the high-voltage elements under any of the following ...
(5) Special Occupancies, Automatic Controls
Electrostatic apparatus shall be equipped with automatic means that will rapidly de-energize the high-voltage elements under any of the following ...
6.4.3.3.5.3 Heating, Ventilating, and Air Conditioning, Automatic Control
Captive key card systems shall be permitted to be used to comply with Section 6.4.3.3.5 ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > 6 Heating, Ventilating, and Air Conditioning > 6.4 Mandatory Provisions > 6.4.3 Controls and Diagnostics > 6.4.3.3 Off-Hour Controls > 6.4.3.3.5 Automatic Control of HVAC in Hotel/Motel Guest Rooms > 6.4.3.3.5.3 Automatic Control
909.12.4 Fire Protection and Life Safety Systems, Automatic Control
Where completely automatic control is required or used, the automatic-control sequences shall be initiated from an appropriately zoned automatic ...