// CODE SNIPPET
1321.10.10 Autogenous Orbital Welding Process
Go To Full Code Chapter
When using the autogenous orbital welding process, joints shall be continuously purged inside and outside with inert gas(es) in accordance with the qualified welding procedure. [NFPA 99:5.1.10.4.5.12]
Related Code Sections
1321.10.10 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Autogenous Orbital Welding Process
When using the autogenous orbital welding process, joints shall be continuously purged inside and outside with inert gas(es) in accordance ...
1322.1 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Welded Joints Procedure
] GTAW autogenous orbital welded joints shall be purged during ...
705.7.2 Sanitary Drainage, Welded Joints
Welded joints between stainless steel pipe and fittings shall be made in accordance with ASME A112.3.1 and shall be welded autogenously. Pipe shall ...
P2906.13.2 Water Supply and Distribution, Welded Joints
Joint surfaces shall be cleaned. The joint shall be welded autogenously or with an approved filler metal in accordance with ASTM A312 ...
705.7 Sanitary Drainage, Stainless Steel Pipe and Joints
and fittings shall be made in accordance with ASME A112.3.1 and shall be welded autogenously. Pipe shall be cleaned, free of scale and contaminating particles ...