// CODE SNIPPET
1926.1418 Authority to Stop Operation
JUMP TO FULL CODE CHAPTER
Whenever there is a concern as to safety, the operator must have the authority to stop and refuse to handle loads until a qualified person has determined that safety has been assured.
[75 FR 48153, August 9, 2010]
Related Code Sections
1926.1418 Cranes & Derricks in Construction, Authority to Stop Operation
Whenever there is a concern as to safety, the operator must have the authority to stop and refuse to handle loads until a qualified person has ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1418 Authority to Stop Operation
1926.1441(a) Cranes & Derricks in Construction,
); § 1926.1418 (Authority to stop operation); §§ 1926.1419 through 1926.1422 (Signals); § 1926.1423 (Fall protection); § 1926.1425 (Keeping clear ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1441 Equipment With a Rated Hoisting/Lifting Capacity of 2,000 Pounds or Less > 1926.1441(a)
1926.753(c)(1)(iv) Steel Erection,
shall have the authority to stop and refuse to handle loads until safety has been assured ...
OSHA 1926 Construction > R Steel Erection > 1926.753 Hoisting and Rigging > 1926.753(c) General > 1926.753(c)(1) Pre-Shift Visual Inspection of Cranes > 1926.753(c)(1)(iv)
1926.1410(h) Cranes & Derricks in Construction,
of the procedures and must have the authority to stop work at any time to ensure safety ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1410 Power Line Safety (All Voltages)--Equipment Operations Closer Than the Table A Zone > 1926.1410(h)
1926.1431(d)(5)(vii) Cranes & Derricks in Construction, Proper Operation Required
Personnel hoisting operations must not begin unless the devices listed in this section are in proper working order. If a device stops working ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1431 Hoisting Personnel > 1926.1431(d) Equipment Criteria > 1926.1431(d)(5) Devices > 1926.1431(d)(5)(vii) Proper Operation Required