// CODE SNIPPET
[A] 110.1.2 Authority to Inspect
JUMP TO FULL CODE CHAPTER
The code official shall inspect, as often as necessary, buildings and premises, including such other hazards or appliances designated by the code official for the purpose of ascertaining and causing to be corrected any conditions that could reasonably be expected to cause fire or contribute to its spread, or any violation of the purpose of this code and of any other law or standard affecting fire safety.
The code official is authorized to accept reports of approved inspection agencies, provided that such agencies satisfy the requirements as to qualifications and reliability.
It shall be the duty of the holder of the permit or their duly authorized agent to notify the code official when work is ready for inspection. It shall be the duty of the permit holder to provide access to and means for inspections of such work that are required by this code.
Work shall not be done beyond the point indicated in each successive inspection without first obtaining the approval of the code official. The code official, upon notification, shall make the requested inspections and shall either indicate the portion of the construction that is satisfactory as completed, or notify the permit holder or his or her agent wherein the same fails to comply with this code. Any portions that do not comply shall be corrected and such portion shall not be covered or concealed until authorized by the code official.
Related Code Sections
109.1.2 Scope and Administration, Authority to Inspect
The code official is authorized to accept reports of approved inspection agencies ...
Wildland-Urban Interface Code 2012 of Montana > 1 Scope and Administration > 109 Inspection and Enforcement > 109.1 Inspection > 109.1.2 Authority to Inspect
110.1.2 Scope and Administration, Authority to Inspect
The code official is authorized to accept reports of approved inspection agencies ...
Wildland-Urban Interface Code 2018 of Montana > 1 Scope and Administration > 110 Inspection and Enforcement > 110.1 Inspection > 110.1.2 Authority to Inspect
110.1.2.3 Scope and Administration, Approval Required
Work shall not be done beyond the point indicated in each successive inspection without first obtaining the approval of the code official. The code ...
Wildland-Urban Interface Code 2018 of Montana > 1 Scope and Administration > 110 Inspection and Enforcement > 110.1 Inspection > 110.1.2 Authority to Inspect > 110.1.2.3 Approval Required
105.2.2 Scope and Administration, Inspection Authorized
Before a new operational permit is approved, the fire code official is authorized to inspect the receptacles, vehicles, buildings, devices ...
Fire Code 2012 of Montana > 1 Scope and Administration > 105 Permits > 105.2 Application > 105.2.2 Inspection Authorized
106.1 Scope and Administration, Inspection Authority
The fire code official is authorized to enter and examine any building, structure, marine vessel, vehicle or premises in accordance with Section ...
Fire Code 2012 of Montana > 1 Scope and Administration > 106 Inspections > 106.1 Inspection Authority