// CODE SNIPPET
H112.2 Attachment of Supports
JUMP TO FULL CODE CHAPTER
Related Code Sections
H112.2 Signs, Attachment of Supports
Supports shall be secured to a bolt or expansion screw that will develop the strength of the supporting chains, guys or steel rods, with a minimum 5 ...
R802.11.1 Roof-Ceiling Construction, Uplift Resistance
than 24 inches (610 mm) on center shall be permitted to be attached to their supporting wall assemblies in accordance with Table R602.3(1 ...
2015 Michigan Residential Code > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.11 Roof Tie-Down > R802.11.1 Uplift Resistance
1405.11.1 Exterior Walls, Attachment
Exterior metal veneer shall be securely attached to the supporting masonry or framing members with corrosion-resistant fastenings, metal ties ...
2015 Michigan Building Code > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.11 Metal Veneers > 1405.11.1 Attachment
A220.127.116.11 Normative Appendix A Rated R-Value of Insulation and Assembly U-factor, C-Factor, and F-Factor Determinations, Filled Cavity
represents unfaced insulation installed above the first layer, perpendicular to the purlins and compressed when the metal roof panels are attached. A ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2013 of Michigan > Normative Appendix A Rated R-Value of Insulation and Assembly U-factor, C-Factor, and F-Factor Determinations > A2 Roofs > A2.3 Metal Building Roofs > A2.3.2 Rated R-Value of Insulation > A18.104.22.168 Filled Cavity