// CODE SNIPPET
202.5.4.13 Assembly Seating Dispersion
Go To Full Code Chapter
In alterations to qualified historic buildings where it is technically infeasible to disperse seating throughout an assembly area, the seating may be located in collected areas. Seating shall adjoin an accessible route which also serves as a means of emergency egress.
Upcodes Diagrams
Related Code Sections
202.5.4.13 Scoping Requirements, Assembly Seating Dispersion
In alterations to qualified historic buildings where it is technically infeasible to disperse seating throughout an assembly area, the seating may ...
221.2.3.1 Scoping Requirements, Horizontal Dispersion
Wheelchair spaces shall be dispersed horizontally. In assembly areas that are required to horizontally disperse wheelchair spaces and companion seats ...
802.10.1 Special Rooms and Spaces, Horizontal Dispersion
: Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the wheelchair space locations are located within the 2nd and 3rd ...
1108.2.4 Accessibility, Dispersion of Wheelchair Spaces in Multilevel Assembly Seating Areas
In multilevel assembly seating areas, wheelchair spaces shall be provided on the main floor level and on one of each two additional floor ...
1109.2.4 Accessibility, Dispersion of Wheelchair Spaces in Multilevel Assembly Seating Areas
In multilevel assembly seating areas, wheelchair spaces shall be provided on the main floor level and on one of each two additional floor ...