// CODE SNIPPET
1926.1407(d) Assembly/Disassembly Inside Table a Clearance Prohibited
JUMP TO FULL CODE CHAPTER
No part of a crane/derrick, load line, or load (including rigging and lifting accessories), whether partially or fully assembled, is allowed closer than the minimum approach distance under Table A (see § 1926.1408) to a power line unless the employer has confirmed that the utility owner/operator has deenergized and (at the worksite) visibly grounded the power line.
Related Code Sections
1926.1407(d) Cranes & Derricks in Construction, Assembly/Disassembly Inside Table a Clearance Prohibited
No part of a crane/derrick, load line, or load (including rigging and lifting accessories), whether partially or fully assembled, is allowed closer ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1407 Power Line Safety (Up to 350 KV)--Assembly and Disassembly > 1926.1407(d) Assembly/Disassembly Inside Table a Clearance Prohibited
1926.1441(b) Cranes & Derricks in Construction, Assembly/Disassembly
In addition to compliance with § § 1926.1403 (Assembly/disassembly--selection of manufacturer or employer procedures) and 1926.1406 (Assembly ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1441 Equipment With a Rated Hoisting/Lifting Capacity of 2,000 Pounds or Less > 1926.1441(b) Assembly/Disassembly
1926.1403 Cranes & Derricks in Construction, Assembly/Disassembly--Selection of Manufacturer or Employer Procedures
When assembling or disassembling equipment (or attachments), the employer must comply with all applicable manufacturer prohibitions and must comply ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1403 Assembly/Disassembly--Selection of Manufacturer or Employer Procedures
1926.1404(m) Cranes & Derricks in Construction, Components and Configuration
with: Manufacturer instructions, prohibitions ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1404 Assembly/Disassembly--General Requirements (Applies to All Assembly and Disassembly Operations) > 1926.1404(m) Components and Configuration
1926.1407 Cranes & Derricks in Construction, Power Line Safety (Up to 350 KV)--Assembly and Disassembly
Before assembling or disassembling equipment, the employer must determine if any part of the equipment, load line, or load (including rigging ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1407 Power Line Safety (Up to 350 KV)--Assembly and Disassembly