// CODE SNIPPET
1910.265(c)(3)(ii) Areas Beneath Floor Openings
JUMP TO FULL CODE CHAPTER
Areas under floor openings shall, where practical, be fenced off. When this is not practical, they shall be plainly marked and telltales shall be installed to hang over these areas.
Related Code Sections
1910.265(c)(3)(ii) Special Industries, Areas Beneath Floor Openings
Areas under floor openings shall, where practical, be fenced off. When this is not practical, they shall be plainly marked and telltales shall ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(c) Building Facilities, and Isolated Equipment > 1910.265(c)(3) Floors > 1910.265(c)(3)(ii) Areas Beneath Floor Openings
1910.179(l)(2)(i) Materials Handling and Storage,
Warning or "out of order" signs shall be placed on the crane, also on the floor beneath or on the hook where visible from the floor ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(l) Maintenance— > 1910.179(l)(2) Maintenance Procedure > 1910.179(l)(2)(i)
1910.142(b) General Environmental Controls, Shelter
quarters shall be provided with windows the total of which shall be not less than one-tenth of the floor area. At least one-half of each window shall ...
OSHA 1910 General Industry > J General Environmental Controls > 1910.142 Temporary Labor Camps > 1910.142(b) Shelter
1910.304(c)(3)(ii) Electrical,
Overhead service conductors may not be installed beneath openings through which materials may be moved, such as openings in farm and commercial ...
OSHA 1910 General Industry > S Electrical > 1910.304 Wiring Design and Protection > 1910.304(c) Outside Conductors, 600 Volts, Nominal, or Less > 1910.304(c)(3) Clearance From Building Openings > 1910.304(c)(3)(ii)
1910.68(b)(5) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Floor Openings
Floor openings for both the "up" and "down" runs shall be not less than 28 inches nor more than 36 inches in width for a 12-inch belt; not less than ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.68 Manlifts > 1910.68(b) General Requirements > 1910.68(b)(5) Floor Openings