// CODE SNIPPET
706.1 Approved Fittings
JUMP TO FULL CODE CHAPTER
Changes in direction of drainage
piping shall be made by the appropriate use of approved
fittings and shall be of the angles presented by a one-sixteenth
bend, one-eighth bend, or one-sixth bend, or other
approved fittings of equivalent sweep.
Related Code Sections
706.1 Sanitary Drainage, Approved Fittings
Changes in direction of drainage
piping shall be made by the appropriate use of approved
fittings and shall be of the angles presented by a one ...
California Plumbing Code 2016 > 7 Sanitary Drainage > 706.0 Changes in Direction of Drainage Flow > 706.1 Approved Fittings
706.1 Sanitary Drainage, Approved Fittings
Changes in the direction of
drainage piping shall be made by the appropriate use of
approved fittings and shall be of the angles presented by a
one ...
California Plumbing Code 2019 > 7 Sanitary Drainage > 706.0 Changes in Direction of Drainage Flow > 706.1 Approved Fittings
D113.2 Fuel Supply: Manufactured/Mobile Home Parks and Recreational Vehicle Parks, Use of Approved Pipe and Fittings of Extension
shall be of approved materials of the
same size as the M/H inlet and shall be supported at not more
than 4 foot (1219 mm) intervals to the M/H. [NFPA ...
California Mechanical Code 2019 > D Fuel Supply: Manufactured/Mobile Home Parks and Recreational Vehicle Parks > D113.0 Fuel Supply Systems Installation > D113.2 Use of Approved Pipe and Fittings of Extension
D113.2 Fuel Supply: Manufactured/Mobile Home Parks and Recreational Vehicle Parks, Use of Approved Pipe and Fittings of Extension
shall be of approved materials of the same size as the M/H inlet and shall be supported at not
more than 4 foot (1219 mm) intervals to the M/H. [NFPA ...
California Mechanical Code 2016 > D Fuel Supply: Manufactured/Mobile Home Parks and Recreational Vehicle Parks > D113.0 Fuel Supply Systems Installation > D113.2 Use of Approved Pipe and Fittings of Extension