// CODE SNIPPET
3308.3 Approved Fireworks
JUMP TO FULL CODE CHAPTER
Fireworks displays shall be conducted using 1.3G, 1.4G, and 1.4S fireworks. The fireworks shall be arranged, located and discharged in a manner that will not endanger any person or damage any property.
Aerial shells or other aerial fireworks shall not exceed 12 inches (305 mm) in diameter and salute shells shall not exceed 3 inches (76.2 mm) in diameter or length unless authorized by the fireworks display permit. Such authorization shall only be granted if the applicant can demonstrate to the satisfaction of the department special circumstances warranting the use of such oversize shell and that such shell can safely be discharged within the confines of the display site. No such request shall be considered on the day of the fireworks display.
Related Code Sections
307.2 Use and Occupancy Classification, Definitions
, without a basement or crawl space, used for the storage or use of hazardous materials and located at an approved distance from other buildings ...
NYC Building Code 2008 > 3 Use and Occupancy Classification > 307 High-Hazard Group H > 307.2 Definitions
Article 17 Standpipe Systems [PDF] (page 16)
storage plants, oil refineries, fireworks plants and other plants deemed by the superintendent to present unusual fire hazards and also in rooms or spaces ...
§27-243 Occupancy and Construction Classification, Classification
-eight the storage of tank trucks or other vehicles, approved by the fire commissioner for the transportation of products having a flash point of over ...
NYC 1968 Code (Vol I) > 3 Occupancy and Construction Classification > 3 Occupancy Group A-High Hazard > §27-243 Classification
*410.1 Fixtures, Faucets and Fixture Fittings, Approval
Drinking fountains shall conform to ASME A112.19.1M, ASME A112.19.2M or ASME A112.19.9M, and water coolers shall conform to ARI 1010. Drinking ...
NYC Plumbing Code 2008 > 4 Fixtures, Faucets and Fixture Fittings > 410 Drinking Fountains > *410.1 Approval
1003.2 Traps, Interceptors and Separators, Approval
The size, type and location of each interceptor and of each separator shall be designed and installed in accordance with the manufacturer's ...
NYC Plumbing Code 2014 > 10 Traps, Interceptors and Separators > 1003 Interceptors and Separators > 1003.2 Approval