// CODE SNIPPET
1910.262(a) Application Requirements
JUMP TO FULL CODE CHAPTER
The requirements of this subpart for textile safety apply to the design, installation, processes, operation, and maintenance of textile machinery, equipment, and other plant facilities in all plants engaged in the manufacture and processing of textiles, except those processes used exclusively in the manufacture of synthetic fibers.
Standards covering issues of occupational safety and health which are of general application without regard to any specific industry are incorporated by reference in paragraphs of this section and made applicable to textiles. All such standards shall be construed according to the rules of construction set out in §1910.5.
Related Code Sections
1910.262(a) Special Industries, Application Requirements
— The requirements of this subpart for textile ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(a) Application Requirements
1910.302(c) Electrical, Applicability of Requirements for Disconnecting Means
The requirement in § 1910.147(c)(2)(iii) that energy isolating devices be capable of accepting a lockout device whenever replacement or major repair ...
OSHA 1910 General Industry > S Electrical > 1910.302 Electric Utilization Systems > 1910.302(c) Applicability of Requirements for Disconnecting Means
1910.265(a) Special Industries, General Requirements—Application
This section includes safety requirements for sawmill operations including, but not limited to, log and lumber handling, sawing, trimming ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(a) General Requirements—Application
1910.269(g)(2)(iv)(B) Special Industries,
equipment rigged to arrest falls is considered a fall arrest system and must meet the applicable requirements for the design and use of those systems. Fall ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > 1910.269(g) Personal Protective Equipment > 1910.269(g)(2) Fall Protection > 1910.269(g)(2)(iv) > 1910.269(g)(2)(iv)(B)
1910.110(a)(6) Hazardous Materials,
DOT container - A container constructed in accordance with the applicable requirements of 49 CFR Chapter 1 ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.110 Storage and Handling of Liquefied Petroleum Gases > 1910.110(a) Definitions Applicable to This Section > 1910.110(a)(6)