// CODE SNIPPET
2004.2 Application of Flammable and Combustible Liquid Finishes
JUMP TO FULL CODE CHAPTER
The application of flammable or Class II combustible liquid finishes is prohibited unless both of the following conditions are met:
- The application of the liquid finish is accomplished in an approved location.
- The application methods and procedures are in accordance with Chapter 24.
Related Code Sections
2004.2 Aviation Facilities, Application of Flammable and Combustible Liquid Finishes
The application of flammable or Class II combustible liquid finishes is prohibited unless both of the following conditions are met: The ...
Fire Code 2015 of New Jersey > 20 Aviation Facilities > 2004 Aircraft Maintenance > 2004.2 Application of Flammable and Combustible Liquid Finishes
2401.1 Flammable Finishes, Scope
of tanks, vats or containers of flammable or combustible liquids for coating, finishing, treatment or similar processes. The application ...
Section 2410 Flammable Finishes, Floor Surfacing and Finishing Operations
systems shall not be operated during resurfacing or refinishing operations or within 4 hours of the application of flammable or combustible liquids ...
Fire Code 2015 of New Jersey > 24 Flammable Finishes > 2410 Floor Surfacing and Finishing Operations
2404.1 Flammable Finishes, General
The application of flammable or combustible liquids by means of spray apparatus in continuous or intermittent processes shall be in accordance ...
2403.2 Flammable Finishes, Sources of Ignition
Electrical equipment, flammable vapor areas or drying operations that are subject to splashing or dripping of liquids shall be specifically ...
Fire Code 2015 of New Jersey > 24 Flammable Finishes > 2403 Protection of Operations > 2403.2 Sources of Ignition