// CODE SNIPPET
2103.11.5 Anchors, Ties and Accessories
Go To Full Code Chapter
Anchors, ties and accessories shall conform to the following standards: ASTM A 36 for structural steel; ASTM A 82 for plain steel wire for concrete reinforcement; ASTM A 185 for plain steel-welded wire fabric for concrete reinforcement; ASTM A 167, Type 304, for stainless and heat-resisting chromium- nickel steel plate, sheet and strip and ASTM A 366 for cold-rolled carbon steel sheet, commercial quality.
Upcodes Diagrams
Related Code Sections
2103.11.5 Masonry, Anchors, Ties and Accessories
Anchors, ties and accessories shall conform to the following standards: ASTM A 36 for structural steel; ASTM A 82 for plain steel wire for concrete ...
2103.11.7.1 Masonry, Hot-Dipped Galvanized
Apply a hot-dipped galvanized coating after fabrication as follows: 1. For joint reinforcement, wall ties, anchors and inserts, apply ...
G305.3 Flood-Resistant Construction, Anchoring
of anchoring are authorized to include, but are not limited to, use of over-the-top or frame ties to ground anchors. This requirement is in addition ...
25.7.2 Reinforcement Details, Ties
Ties shall consist of a closed loop of deformed bar with spacing in accordance with (a) and (b): (a) Clear spacing of at least (4/3)dagg (b ...
1916.2 Concrete, Continuity and Ties
, the bottom mat reinforcement shall be not less than, the steel required for temperature reinforcement. The bottom mat reinforcement shall be anchored ...