// CODE SNIPPET
R606.14 Anchored and Adhered Masonry Veneer
Related Code Sections
R606.14 Wall Construction, Anchored and Adhered Masonry Veneer
Anchored masonry veneer installed over a backing of wood or cold-formed steel shall meet the requirements of Section R703.8 ...
Residential Code 2018 of Kansas > 6 Wall Construction > R606 General Masonry Construction > R606.14 Anchored and Adhered Masonry Veneer
1403.4 Exterior Walls, Masonry
and metal accessories used in anchored and adhered veneer shall meet the physical requirements of Chapter 21. The backing of anchored and adhered veneer ...
R905.2.8.3 Roof Assemblies, Sidewall Flashing
sidewall, the vertical leg of the flashing shall be continuous under the siding. Where anchored masonry veneer is provided on the vertical sidewall ...
Residential Code 2018 of Kansas > 9 Roof Assemblies > R905 Requirements for Roof Coverings > R905.2 Asphalt Shingles > R905.2.8 Flashing > R905.2.8.3 Sidewall Flashing
1404.10.1.4.3 Exterior Walls, Adhering Veneer
The masonry veneer units shall be adhered to the mortar scratch coat with a nominal 1 / 2 -inch-thick (12.7 mm) setting bed of mortar complying ...
Building Code 2018 of Kansas > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.10 Adhered Masonry Veneer > 1404.10.1 Exterior Adhered Masonry Veneer > 1404.10.1.4 Adhered Masonry Veneer Installed With Lath and Mortar > 1404.10.1.4.3 Adhering Veneer
2103.2.4 Masonry, Mortar for Adhered Masonry Veneer
Mortar for use with adhered masonry veneer shall conform to ASTM C270 for Type N or S, or shall comply with ANSI A118.4 for latex-modified Portland ...
Building Code 2018 of Kansas > 21 Masonry > 2103 Masonry Construction Materials > 2103.2 Mortar > 2103.2.4 Mortar for Adhered Masonry Veneer