// CODE SNIPPET
510.4.2.1 Amplification Systems Allowed
JUMP TO FULL CODE CHAPTER
Buildings and structures that cannot support the required level of radio coverage shall be equipped with a radiating cable system, a distributed antenna system with Federal Communications Commission (FCC)-certified signal boosters, or other system approved by the fire code official in order to achieve the required adequate radio coverage.
Related Code Sections
510.4.2.1 Fire Service Features, Amplification Systems Allowed
Buildings and structures that cannot support the required level of radio coverage shall be equipped with a radiating cable system, a distributed ...
Fire Code 2015 of Alabama > 5 Fire Service Features > 510 Emergency Responder Radio Coverage > 510.4 Technical Requirements > 510.4.2 System Design > 510.4.2.1 Amplification Systems Allowed
24.5.2.2.3 Emergency Communications Systems (ECS), Amplification Components
Buildings and structures that cannot support the required level of radio coverage shall be equipped with a radiating cable system or a distributed ...
National Fire Alarm and Signaling Code 2013 of Alabama > 24 Emergency Communications Systems (ECS) > 24.5 Two-Way, In-Building Emergency Communications Systems > 24.5.2* Two-Way Radio Communications Enhancement Systems > 24.5.2.2 Radio Coverage > 24.5.2.2.3 Amplification Components
640.9 Special Equipment, Wiring Methods
Wiring and equipment from source of power to and between devices connected to the premises wiring systems shall comply with the requirements ...
National Electrical Code 2014 of Alabama > 6 Special Equipment > 640 Audio Signal Processing, Amplification, and Reproduction Equipment > 640.9 Wiring Methods
3.3.214 Definitions, Public Address System
An electronic amplification system with a mixer, amplifier, and loudspeakers, used to reinforce a given sound and distributing the "sound ...
National Fire Alarm and Signaling Code 2013 of Alabama > 3 Definitions > 3.3 General Definitions > 3.3.214 Public Address System
640.1 Special Equipment, Scope
This article covers equipment and wiring for audio signal generation, recording, processing, amplification, and reproduction; distribution of sound ...
National Electrical Code 2014 of Alabama > 6 Special Equipment > 640 Audio Signal Processing, Amplification, and Reproduction Equipment > 640.1 Scope