// CODE SNIPPET
506.3.3 Amount of Increase
JUMP TO FULL CODE CHAPTER
The area factor increase based on frontage shall be determined in accordance with Equation 5-5:
Related Code Sections
506.3.3 General Building Heights and Areas, Amount of Increase
The area factor increase based on frontage shall be determined in accordance with Equation 5-5: (Equation 5-5) where: I f = Area factor ...
Building Code 2018 of Illinois > 5 General Building Heights and Areas > 506 Building Area > 506.3 Frontage Increase > 506.3.3 Amount of Increase
9.6.4 Lighting, Room Geometry Adjustment
be increased by the following amount: LPD Increase = Base Space LPD × 0.20 where Base Space LPD = the applicable LPD allowance from Table ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > 9 Lighting > 9.6 Alternative Compliance Path: Space-By-Space Method > 9.6.4 Room Geometry Adjustment
1017.2.1 Means of Egress, Exterior Egress Balcony Increase
shall be not less than the amount of the increase taken ...
Building Code 2018 of Illinois > 10 Means of Egress > 1017 Exit Access Travel Distance > 1017.2 Limitations > 1017.2.1 Exterior Egress Balcony Increase
414.2.5 Special Detailed Requirements Based on Occupancy and Use, Hazardous Material in Group M Display and Storage Areas and in Group S Storage Areas
amounts shall be increased to 2,250 pounds where individual packages are in the original sealed containers from the manufacturer or packager and do ...
Building Code 2018 of Illinois > 4 Special Detailed Requirements Based on Occupancy and Use > 414 Hazardous Materials > 414.2 Control Areas > 414.2.5 Hazardous Material in Group M Display and Storage Areas and in Group S Storage Areas
126.96.36.199 Earthquake-Resistant Structures,
Where beams frame into all four sides of the joint and where each beam width is at least three-fourths the column width, the amount of reinforcement ...
Building Code Requirements for Structural Concrete of Illinois > 18 Earthquake-Resistant Structures > 18.8 Joints of Special Moment Frames > 18.8.3 Transverse Reinforcement > 188.8.131.52