// CODE SNIPPET
(D) Ambient Temperatures
JUMP TO FULL CODE CHAPTER
Where subject to ambient temperatures in excess of 50°C (122°F) unless listed otherwise.
Related Code Sections
(D) Wiring Methods and Materials, Ambient Temperatures
Where subject to ambient temperatures in excess of 50°C (122°F) unless listed otherwise ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 352 Rigid Polyvinyl Chloride Conduit: Type PVC > 352.12 Uses Not Permitted > (D) Ambient Temperatures
(D) Wiring Methods and Materials, Ambient Temperatures
Where subject to ambient temperatures in excess of 50°C (122°F) unless listed otherwise ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 355 Reinforced Thermosetting Resin Conduit: Type RTRC > 355.12 Uses Not Permitted > (D) Ambient Temperatures
(4) Wiring Methods and Materials, Ambient Temperature Correction
Ampacities for ambient temperatures other than those specified in the ampacity tables shall be corrected in accordance with Table 311.60(D)(4 ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 311 Medium Voltage Conductors and Cable > 311.60 Ampacities of Conductors > (D) Ampacity Adjustment > (4) Ambient Temperature Correction
(5) Special Occupancies, Ambient Temperature Range
Electrical equipment designed for use in the ambient temperature range between -25°C to +40°C shall require no ambient temperature marking. For ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 500 Hazardous (Classified) Locations, Classes I, II, and III, Divisions 1 and 2 > 500.8 Equipment > (C) Marking > (5) Ambient Temperature Range
(B) Wiring Methods and Materials, Ambient Temperature Correction Factors
Ampacities for ambient temperatures other than those shown in the ampacity tables shall be corrected in accordance with Table 310.15(B)(1) or Table ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 310 Conductors for General Wiring > 310.15 Ampacity Tables > (B) Ambient Temperature Correction Factors