// CODE SNIPPET
P-601.5 Aluminum and Plastic Pipe
JUMP TO FULL CODE CHAPTER
Aluminum and plastic pipe shall be supported a minimum of at least 5 feet on centers and closer, if required, to prevent horizontal deformation of the piping.
Related Code Sections
P-601.5 Pipe Supports, Aluminum and Plastic Pipe
Aluminum and plastic pipe shall be supported a minimum of at least 5 feet on centers and closer, if required, to prevent horizontal deformation ...
Philadelphia Plumbing Code > 6 Pipe Supports > P-601 Vertical Piping > P-601.5 Aluminum and Plastic Pipe
1202.4 Hydronic Piping, Piping Materials Standards
TABLE 1202.4 HYDRONIC PIPE MATERIAL STANDARD (see Chapter 15) Acrylonitrile butadiene styrene (ABS) plastic pipe ASTM D1527; ASTM ...
2018 Philadelphia Mechanical Code > 12 Hydronic Piping > 1202 Material > 1202.4 Piping Materials Standards
305.5 General Regulations, Waterproofing of Openings
Joints at the roof and around vent pipes shall be made water tight by the use of lead, copper, galvanized steel, aluminum, plastic or other approved ...
Plumbing Code 2018 of Philadelphia > 3 General Regulations > 305 Protection of Pipes and Plumbing System Components > 305.5 Waterproofing of Openings