// CODE SNIPPET
16184.108.40.206 Alternative Seismic Design Category Determination
JUMP TO FULL CODE CHAPTER
- In each of the two orthogonal directions, the approximate fundamental period of the structure, Ta, in each of the two orthogonal directions determined in accordance with Section 220.127.116.11 of ASCE 7, is less than 0.8 Ts determined in accordance with Section 11.8.6 of ASCE 7.
- In each of the two orthogonal directions, the fundamental period of the structure used to calculate the story drift is less than Ts.
- Equation 12.8-2 of ASCE 7 is used to determine the seismic response coefficient, Cs.
- The diaphragms are rigid or are permitted to be idealized as rigid in accordance with Section 12.3.1 of ASCE 7 or, for diaphragms permitted to be idealized as flexible in accordance with Section 12.3.1 of ASCE 7, the distances between vertical elements of the seismic force-resisting system do not exceed 40 feet (12 192 mm).
Related Code Sections
1618.104.22.168 Structural Design, Alternative Seismic Design Category Determination
Where S 1 is less than 0.75, the seismic design category is permitted to be determined from Table 1613.2.5(1) alone where all of the following ...
Building Code 2018 of Illinois > 16 Structural Design > 1613 Earthquake Loads > 1613.2 Seismic Ground Motion Values > 1613.2.5 Determination of Seismic Design Category > 1622.214.171.124 Alternative Seismic Design Category Determination
1810.3.10.4 Soils and Foundations, Seismic Reinforcement
of zero curvature. For structures assigned to Seismic Design Category D, E or F, the micropile shall be considered as an alternative system ...
Building Code 2018 of Illinois > 18 Soils and Foundations > 1810 Deep Foundations > 1810.3 Design and Detailing > 1810.3.10 Micropiles > 1810.3.10.4 Seismic Reinforcement
4.4.6 Structural System Requirements, Seismic-Force-Resisting System
Every structure shall be assigned to a Seismic Design Category in accordance with the general building code or as determined by the authority having ...
Building Code Requirements for Structural Concrete of Illinois > 4 Structural System Requirements > 4.4 Structural System and Load Paths > 4.4.6 Seismic-Force-Resisting System
2205.2 Steel, Seismic Design
to Seismic Design Category B or C shall be of any construction permitted in Section 2205. Where a response modification coefficient, R , in accordance ...
1807.1.6.3.2 Soils and Foundations, Seismic Requirements
Based on the seismic design category assigned to the structure in accordance with Section 1613, masonry foundation walls designed using Tables ...
Building Code 2018 of Illinois > 18 Soils and Foundations > 1807 Foundation Walls, Retaining Walls and Embedded Posts and Poles > 1807.1 Foundation Walls > 1807.1.6 Prescriptive Design of Concrete and Masonry Foundation Walls > 1807.1.6.3 Masonry Foundation Walls > 1807.1.6.3.2 Seismic Requirements