// CODE SNIPPET
312.2.3 Alternative Drainage and Vent Rough—In Test
JUMP TO FULL CODE CHAPTER
When permitted by the manufacturer of the piping, fittings, and solvent cement (if part of the plumbing system), an alternative method of testing the drainage and vent system, such as compressed gas or vacuum, may be permitted to meet the drainage and vent rough-in test requirements of this code as long as the test is conducted strictly in accordance with the requirements published in the manufacturer's installation instructions.
Related Code Sections
312.2.3 General Regulations, Alternative Drainage and Vent Rough—In Test
the drainage and vent system, such as compressed gas or vacuum, may be permitted to meet the drainage and vent rough-in test requirements of this code ...
Ohio Plumbing Code 2011 > 3 General Regulations > 312 Tests and Inspections > 312.2 Drainage and Vent Rough-In Test > 312.2.3 Alternative Drainage and Vent Rough—In Test
312.2.3 General Regulations, Alternative Drainage and Vent Rough-In Test
the drainage and vent system,
such as compressed gas or vacuum, may be permitted
to meet the drainage and vent rough-in test requirements
of this code ...
Ohio Plumbing Code 2017 > 3 General Regulations > 312 Tests and Inspections > 312.2 Drainage and Vent Water Test > 312.2.3 Alternative Drainage and Vent Rough-In Test
312.2 General Regulations, Drainage and Vent Rough-In Test
), an
alternative method of testing the drainage and vent system,
such as compressed gas or vacuum, may be permitted
to meet the drainage and vent rough ...
Ohio Plumbing Code 2017 > 3 General Regulations > 312 Tests and Inspections > 312.2 Drainage and Vent Rough-In Test
312.2.1 General Regulations, Drainage and Vent Rough-In Water Test
A water
test shall be applied to the drainage system either in its
entirety or in sections. If applied to the entire system, all
openings ...
Ohio Plumbing Code 2017 > 3 General Regulations > 312 Tests and Inspections > 312.2 Drainage and Vent Water Test > 312.2.1 Drainage and Vent Rough-In Water Test
312.2.2 General Regulations, Drainage and Vent Rough-In Air Test
When permitted
by the manufacturer of the piping, fittings, and solvent
cement (if part of the plumbing system), an air test
shall be made by forcing ...
Ohio Plumbing Code 2017 > 3 General Regulations > 312 Tests and Inspections > 312.2 Drainage and Vent Water Test > 312.2.2 Drainage and Vent Rough-In Air Test