// CODE SNIPPET
608.2.3 Alternate Roll-In Type Shower Compartments
JUMP TO FULL CODE CHAPTER
Alternate roll-in type shower compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides. A 36 inch (915 mm) wide minimum entry shall be provided at one end of the long side of the compartment.
![]() |
Related Code Sections
608.2.3 Plumbing Elements and Facilities, Alternate Roll-In Type Shower Compartments
Figure 608.2.3 Alternate Roll-In Type Shower Compartment Size and Clearance ...
2010 ADA Standards > 6 Plumbing Elements and Facilities > 608 Shower Compartments > 608.2 Size and Clearances for Shower Compartments > 608.2.3 Alternate Roll-In Type Shower Compartments
608.3 Plumbing Elements and Facilities, Grab Bars
In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from ...
610.3 Plumbing Elements and Facilities, Shower Compartment Seats
in an alternate roll-in type shower compartment, it shall be a folding type, shall be installed on the front wall opposite the back wall, and shall extend from ...
2010 ADA Standards > 6 Plumbing Elements and Facilities > 610 Seats > 610.3 Shower Compartment Seats
610 Plumbing Elements and Facilities, Seats
is provided in an alternate roll-in type shower compartment, it shall be a folding type, shall be installed on the front wall opposite the back wall ...
608.5.2 Plumbing Elements and Facilities, Standard Roll-In Type Shower Compartments
In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 ...
2010 ADA Standards > 6 Plumbing Elements and Facilities > 608 Shower Compartments > 608.5 Controls > 608.5.2 Standard Roll-In Type Shower Compartments