// CODE SNIPPET
2303.4.5 Alterations to Trusses
JUMP TO FULL CODE CHAPTER
Truss members and components shall not be cut, notched, drilled, spliced or otherwise altered in any way without written concurrence and approval of a registered design professional. Alterations resulting in the addition of loads to any member (for example, HVAC equipment, piping, additional roofing or insulation) shall not be permitted without verification that the truss is capable of supporting such additional loading.
Related Code Sections
2303.4.5 Wood, Alterations to Trusses
Truss members and components shall not be cut, notched, drilled, spliced or otherwise altered in any way without written concurrence and approval ...
Building Code 2018 of Illinois > 23 Wood > 2303 Minimum Standards and Quality > 2303.4 Trusses > 2303.4.5 Alterations to Trusses
2308.4.3 Wood, Engineered Wood Products
Engineered wood products shall be installed in accordance with manufacturer's recommendations. Cuts, notches and holes bored in trusses, structural ...
Building Code 2018 of Illinois > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.4 Floor Framing > 2308.4.3 Engineered Wood Products
1705.14.4.7 Special Inspections and Tests, Joists and Trusses
At joists and trusses, thickness measurements shall be made at seven locations around the joist or truss at each end of a 12-inch (305 mm) length ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1705 Required Special Inspections and Tests > 1705.14 Sprayed Fire-Resistant Materials > 1705.14.4 Thickness > 1705.14.4.7 Joists and Trusses
18.12 Earthquake-Resistant Structures, Diaphragms and Trusses
Section 18.12.11 shall apply to structural trusses ...
Building Code Requirements for Structural Concrete of Illinois > 18 Earthquake-Resistant Structures > 18.12 Diaphragms and Trusses