// CODE SNIPPET
2.9.5 Allowable Deflections of Machinery and Sheave Beams, Their Supports, and Any Support Members Loaded in Bending That Transmit Load to Guide Rails or Structural Walls
Safety Code for Elevators and Escalators 2016 of New York State > 2 Electric Elevators > 2.9 Machinery and Sheave Beams, Supports, and Foundations > 2.9.5 Allowable Deflections of Machinery and Sheave Beams, Their Supports, and Any Support Members Loaded in Bending That Transmit Load to Guide Rails or Structural Walls
Go To Full Code Chapter
The allowable deflections of machinery and sheave beams, their immediate supports, and any support members loaded in bending that transmit load to guide rails or structural walls under static load shall not exceed 1/1666 of the span.
Upcodes Diagrams
Related Code Sections
2.9.5 Electric Elevators, Allowable Deflections of Machinery and Sheave Beams, Their Supports, and Any Support Members Loaded in Bending That Transmit Load to Guide Rails or Structural Walls
The allowable deflections of machinery and sheave beams, their immediate supports, and any support members loaded in bending that transmit load ...
Safety Code for Elevators and Escalators 2016 of New York State > 2 Electric Elevators > 2.9 Machinery and Sheave Beams, Supports, and Foundations > 2.9.5 Allowable Deflections of Machinery and Sheave Beams, Their Supports, and Any Support Members Loaded in Bending That Transmit Load to Guide Rails or Structural Walls
2.9.5 Electric Elevators, Allowable Deflections of Machinery and Sheave Beams, Their Supports, and Any Support Members Loaded in Bending That Transmit Load to Guide Rails or Structural Walls
The allowable deflections of machinery and sheave beams, their immediate supports, and any support members loaded in bending that transmit load ...
Safety Code for Elevators and Escalators 2013 of New York State > 2 Electric Elevators > 2.9 Machinery and Sheave Beams, Supports, and Foundations > 2.9.5 Allowable Deflections of Machinery and Sheave Beams, Their Supports, and Any Support Members Loaded in Bending That Transmit Load to Guide Rails or Structural Walls
5.11.9.4.2 Special Application Elevators,
The allowable deflections of machinery and sheave beams, their immediate supports, and any support members loaded in bending that transmit load ...
Safety Code for Elevators and Escalators 2013 of New York State > 5 Special Application Elevators > 5.11 Wind Turbine Tower Elevators > 5.11.9 Machinery and Sheave Beams, Supports, and Foundations > 5.11.9.4 Allowable Stresses and Deflections for Machinery and Sheave Beams, Their Supports, and Any Support Members That Transmit Load to the Turbine Tower Walls > 5.11.9.4.2
2.9.4 Electric Elevators, Allowable Stresses for Machinery and Sheave Beams or Floors, Their Supports, and Any Support Members That Transmit Load to the Guide Rails or Structural Walls
The unit stresses for all machinery and sheave beams and floors and their supports, based on the loads computed as specified in 2.9.2 or 2.9.6 ...
Safety Code for Elevators and Escalators 2013 of New York State > 2 Electric Elevators > 2.9 Machinery and Sheave Beams, Supports, and Foundations > 2.9.4 Allowable Stresses for Machinery and Sheave Beams or Floors, Their Supports, and Any Support Members That Transmit Load to the Guide Rails or Structural Walls
Section 2.9 Electric Elevators, Machinery and Sheave Beams, Supports, and Foundations
beams, their immediate supports, and any support members loaded in bending that transmit load to guide rails or structural walls under static load ...