// CODE SNIPPET
1926.300(b)(4)(iv)(c) Alligator Shears
Related Code Sections
1926.300(b)(4)(iv)(c) Tools - Hand and Power, Alligator Shears
OSHA 1926 Construction > I Tools - Hand and Power > 1926.300 General Requirements > 1926.300(b) Guarding > 1926.300(b)(4) Point of Operation Guarding > 1926.300(b)(4)(iv) > 1926.300(b)(4)(iv)(c) Alligator Shears
1926.600(a)(6)(vii)(B) Motor Vehicles, Mechanized Equipment, and Marine Operations,
transmitters. Crews shall be provided with nonconductive poles having large alligator clips or other similar protection to attach the ground cable ...
OSHA 1926 Construction > O Motor Vehicles, Mechanized Equipment, and Marine Operations > 1926.600 Equipment > 1926.600(a) General Requirements > 1926.600(a)(6) > 1926.600(a)(6)(vii) > 1926.600(a)(6)(vii)(B)
1926.754(c)(2) Steel Erection, Installation of Shear Connectors on Composite Floors, Roofs and Bridge Decks
When shear connectors are used in construction of composite floors, roofs and bridge decks, employees shall lay out and install the shear connectors ...
OSHA 1926 Construction > R Steel Erection > 1926.754 Structural Steel Assembly > 1926.754(c) Walking/Working Surfaces -- Shear Connectors and Other Similar Devices > 1926.754(c)(2) Installation of Shear Connectors on Composite Floors, Roofs and Bridge Decks
1926.760(c)(7) Steel Erection,
Final deck attachments and installation of shear connectors shall not be performed in the CDZ ...
OSHA 1926 Construction > R Steel Erection > 1926.760 Fall Protection > 1926.760(c) Controlled Decking Zone (CDZ) > 1926.760(c)(7)
1926.705(n) Concrete and Masonry Construction,
Load transfer from jacks/lifting units to building columns shall not be executed until the welds on the column shear plates (weld blocks) are cooled ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.705 Requirements for Lift-Slab Operations > 1926.705(n)