// CODE SNIPPET
(A) All Wiring Installations
Related Code Sections
(A) Wiring Methods and Materials, All Wiring Installations
This article covers general requirements for wiring methods and materials for all wiring installations unless modified by other articles in Chapter 3 ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.1 Scope > (A) All Wiring Installations
590.2 Special Occupancies, All Wiring Installations
Except as specifically modified in this article, all other requirements of this Code for permanent wiring shall apply to temporary wiring ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 590 Temporary Installations > 590.2 All Wiring Installations
(A) Special Occupancies, Wiring and Equipment Embedded, Under Slab, or Underground
All wiring installed in or under the hangar floor shall comply with the requirements for Class I, Division 1 locations. Where such wiring is located ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 513 Aircraft Hangars > 513.8 Underground Wiring > (A) Wiring and Equipment Embedded, Under Slab, or Underground
(A) Special Occupancies, Flexibility
Flexibility of the wiring system shall be maintained between floating buildings and the supply conductors. All wiring shall be installed so ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 555 Marinas, Boatyards, Floating Buildings, and Commercial and Noncommercial Docking Facilities > 555.52 Installation of Services and Feeders > (A) Flexibility
808.1 Alterations—Level 2, New Installations
All newly installed electrical equipment and wiring relating to work done in any work area shall comply with the materials and methods requirements ...
Minnesota Conservation Code for Existing Buildings 2015 > 8 Alterations—Level 2 > 808 Electrical > 808.1 New Installations