// CODE SNIPPET
26.2.2 Alarm Signal Preverification
JUMP TO FULL CODE CHAPTER
Related Code Sections
26.2.2 Supervising Station Alarm Systems, Alarm Signal Preverification
Where alarm signal verification is required by the responsible fire department, the supervising station shall immediately notify the communications ...
National Fire Alarm and Signaling Code 2013 of Colorado > 26 Supervising Station Alarm Systems > 26.2 General > 26.2.2 Alarm Signal Preverification
10.12 Fundamentals, Alarm Signals
A coded alarm signal shall consist of not less than three complete rounds of the number transmitted ...
23.16.3 Protected Premises Fire Alarm Systems, Alarm Signals
When actuated, each low-power radio transmitter shall automatically transmit an alarm signal ...
National Fire Alarm and Signaling Code 2013 of Colorado > 23 Protected Premises Fire Alarm Systems > 23.16* Special Requirements for Low-Power Radio (Wireless) Systems > 23.16.3 Alarm Signals
22.214.171.124 Supervising Station Alarm Systems, Alarm Signals
Alarm signals initiated by manual fire alarm boxes, automatic fire detectors, waterflow from the automatic sprinkler system, or actuation of other ...
National Fire Alarm and Signaling Code 2013 of Colorado > 26 Supervising Station Alarm Systems > 26.3 Central Station Service Alarm Systems > 26.3.8 Disposition of Signals > 126.96.36.199 Alarm Signals
2703.12.3 Semiconductor Fabrication Facilities, Alarm Signals
Activation of the emergency alarm system shall sound a local alarm and transmit a signal to the emergency control station ...
Fire Code 2021 of Colorado > 27 Semiconductor Fabrication Facilities > 2703 General Safety Provisions > 2703.12 Emergency Alarm System > 2703.12.3 Alarm Signals