Related Code Sections
Aisles and aisle accessways serving a room or space used for assembly purposes shall comply with Section 1029 ...
: In assembly spaces with fixed seating , edge protection is not required on the sides of ramped aisles where the ramped aisles provide access to the adjacent seating and aisle accessways ...
protection in accordance with Sections 1012.10 and 1012.10.1. Exception: In assembly spaces with fixed seating , edge protection is not required on the sides of ramped aisles where ...
Aisles and aisle accessways serving a smoke-protected assembly seating area shall be provided with a smoke control system complying with Section ...
be permitted to comply with the assembly aisle walking surface requirements of Section 1029.13. Transitions between stairways and stepped aisles shall comply with Section 1029.10. A stairway that connects a vomitory to a cross aisle or concourse shall be permitted to comply with the assembly aisle walking surface requirements of Section 1029.13. Transitions between stairways and stepped aisles shall comply with Section 1029.10. There shall not be obstructions in the minimum width or required capacity of aisles . Exception: Handrails are permitted to project into the required width of stepped aisles and ramped aisles in accordance with Section 1014.8. Aisle accessways serving arrangements of seating at tables or counters shall comply with the capacity requirements of Section 1005.1 but shall not have less than 12 inches (305 mm) of width plus 1 / 2 inch (12.7 mm) of width for each additional 1 foot (305 mm), or fraction thereof, beyond 12 feet (3658 mm) of aisle accessway length measured from the center of the seat farthest from an aisle . Exception: Portions of an aisle accessway having a length not exceeding 6 feet (1829 mm) and used by a total of not more than four persons. A room or space used ...