// CODE SNIPPET
1910.252(c)(4)(ii) Airline Respirators
JUMP TO FULL CODE CHAPTER
In circumstances for which it is impossible to provide such ventilation, airline respirators or hose masks approved for this purpose by the National Institute for Occupational Safety and Health (NIOSH) under 42 CFR part 84 must be used.
Related Code Sections
1910.252(c)(4)(ii) Welding, Cutting, and Brazing, Airline Respirators
In circumstances for which it is impossible to provide such ventilation, airline respirators or hose masks approved for this purpose by the National ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(c) Health Protection and Ventilation > 1910.252(c)(4) Ventilation in Confined Spaces > 1910.252(c)(4)(ii) Airline Respirators
1910.120(j)(2)(i) Hazardous Materials,
Where an airline respirator system is used, connections to the source of air supply shall be protected from contamination and the entire system shall ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.120 Hazardous Waste Operations and Emergency Response > 1910.120(j) Handling Drums and Containers > 1910.120(j)(2) Opening Drums and Containers > 1910.120(j)(2)(i)
1910.252(c)(9)(i) Welding, Cutting, and Brazing, General
ventilation or airline respirators unless atmospheric tests under the most adverse conditions show that employee exposure is within the acceptable ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(c) Health Protection and Ventilation > 1910.252(c)(9) Cadmium > 1910.252(c)(9)(i) General
1910.252(c)(10) Welding, Cutting, and Brazing, Mercury
using local exhaust ventilation or airline respirators unless atmospheric tests under the most adverse conditions show that employee exposure is within ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(c) Health Protection and Ventilation > 1910.252(c)(10) Mercury
1910.252(c) Welding, Cutting, and Brazing, Health Protection and Ventilation
welder, except where local exhaust hoods and booths as per paragraph (c)(3) of this section, or airline respirators approved by the U.S. Bureau ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(c) Health Protection and Ventilation