// CODE SNIPPET
1910.218(e)(1) Air-Lift Hammers
JUMP TO FULL CODE CHAPTER
Air-lift hammers shall have a safety cylinder head as required in paragraph (d)(1) of this section.
Air-lift hammers shall be provided with two drain cocks: one on main head cylinder, and one on clamp cylinder.
Air piping shall conform to the specifications of the ANSI B31.1.0-1967, Power Piping with Addenda issued before April 28, 1971, which is incorporated by reference as specified in Sec. 1910.6.
Air-lift hammers shall have an air shutoff valve as required in paragraph (d)(2) of this section.
Related Code Sections
1910.218(e)(1) Machinery and Machine Guarding, Air-Lift Hammers
Air-lift hammers shall have a safety cylinder head as required in paragraph (d)(1) of this section ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.218 Forging Machines > 1910.218(e) Gravity Hammers > 1910.218(e)(1) Air-Lift Hammers
1910.211(e)(4) Machinery and Machine Guarding, Gravity Hammers
and the attached upper die. Examples: board hammers and air-lift hammers ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(e) > 1910.211(e)(4) Gravity Hammers
1910.218 Machinery and Machine Guarding, Forging Machines
Air-lift hammers shall be provided with two drain cocks: one on main head cylinder, and one ...
1910.211(e) Machinery and Machine Guarding,
by the mass and velocity of a freely falling ram and the attached upper die. Examples: board hammers and air-lift hammers ...
1910.218(d) Machinery and Machine Guarding, Power-Driven Hammers
Steam hammers shall be provided with a quick closing emergency valve ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.218 Forging Machines > 1910.218(d) Power-Driven Hammers