// CODE SNIPPET
E3904.7 Air Handling-Stud Cavity and Joist Spaces
JUMP TO FULL CODE CHAPTER
Where wiring methods having a nonmetallic covering pass through stud cavities and joist spaces used for air handling, such wiring shall pass through such spaces perpendicular to the long dimension of the spaces. [300.22(C) Exception]
Related Code Sections
E3904.7 Power and Lighting Distribution, Air Handling-Stud Cavity and Joist Spaces
Where wiring methods having a nonmetallic covering pass through stud cavities and joist spaces used for air handling, such wiring shall pass through ...
Residential Code 2018 of Kansas > 39 Power and Lighting Distribution > E3904 General Installation Requirements > E3904.7 Air Handling-Stud Cavity and Joist Spaces
602.3 Duct Systems, Stud Cavity and Joist Space Plenums
Stud wall cavities and the spaces between solid floor joists to be utilized as air plenums shall comply with the following conditions: Such ...
Mechanical Code 2018 of Kansas > 6 Duct Systems > 602 Plenums > 602.3 Stud Cavity and Joist Space Plenums
M1601.1.1 Duct Systems, Above-Ground Duct Systems
Stud wall cavities shall not convey air from more than one floor level. 7.4. Stud wall cavities and joist-space plenums shall be isolated from ...
Residential Code 2018 of Kansas > 16 Duct Systems > M1601 Duct Construction > M1601.1 Duct Design > M1601.1.1 Above-Ground Duct Systems
17.5.3.1* Initiating Devices, Total (Complete) Coverage
beams of a combustible roof or floor deck. Where the concealed space is entirely filled with a noncombustible insulation. (In solid joist construction ...
National Fire Alarm and Signaling Code 2016 of Kansas > 17 Initiating Devices > 17.5 Requirements for Smoke and Heat Detectors > 17.5.3* Detector Coverage > 17.5.3.1* Total (Complete) Coverage
R602.3.3 Wall Construction, Bearing Studs
Where joists, trusses or rafters are spaced more than 16 inches (406 mm) on center and the bearing studs below are spaced 24 inches (610 mm ...
Residential Code 2018 of Kansas > 6 Wall Construction > R602 Wood Wall Framing > R602.3 Design and Construction > R602.3.3 Bearing Studs