// CODE SNIPPET
1910.263(i)(14) Air-Conditioning Units
JUMP TO FULL CODE CHAPTER
[Reserved]
On large units with doors to chambers large enough to be entered, all door locks shall be operable from both inside and outside.
Related Code Sections
1910.263(i)(14) Special Industries, Air-Conditioning Units
[Reserved] On large units with doors to chambers ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(i) Miscellaneous Equipment > 1910.263(i)(14) Air-Conditioning Units
1910.106(e)(3) Hazardous Materials, Unit Physical Operations
shall be designed so as to limit flammable vapor-air mixtures under normal operating conditions to the interior of equipment, and to not more than 5 ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(e) Industrial Plants > 1910.106(e)(3) Unit Physical Operations
1910.252(c)(4)(iii) Welding, Cutting, and Brazing, Self-Contained Units
, pressure-demand supplied-air respirator with an auxiliary, self-contained air supply approved by NIOSH under 42 CFR part 84 must be used ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(c) Health Protection and Ventilation > 1910.252(c)(4) Ventilation in Confined Spaces > 1910.252(c)(4)(iii) Self-Contained Units
1910.254(b)(2) Welding, Cutting, and Brazing, Environmental Conditions
the temperature of the cooling air does not exceed 40 deg. C. (104 deg. F.) and where the altitude does not exceed 3,300 feet (1,005.8 m), and shall be suitable ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.254 Arc Welding and Cutting > 1910.254(b) Application of Arc Welding Equipment > 1910.254(b)(2) Environmental Conditions
1910.169 Compressed Gas and Compressed Air Equipment, Air Receivers
This section applies to compressed air receivers, and other equipment used in providing and utilizing compressed air for performing operations ...