// CODE SNIPPET
E3603.1.5 Adjustment/Correction Factors
Related Code Sections
E3603.1.5 Services, Adjustment/Correction Factors
Where correction or adjustment factors are required by Section E3705.2 or E3705.3, they shall be permitted to be applied to the ampacity associated ...
Residential Code 2018 of Kansas > 36 Services > E3603 Service, Feeder and Grounding Electrode Conductor Sizing > E3603.1 Grounded and Ungrounded Service Conductor Size > E3603.1.5 Adjustment/Correction Factors
(1) Special Equipment, Before Application of Adjustment and Correction Factors
One hundred twenty-five percent of the maximum currents calculated in 690.8(A) before the application of adjustment and correction factors ...
National Electrical Code 2017 of Kansas > 6 Special Equipment > 690 Solar Photovoltaic (PV) Systems > 690.8 Circuit Sizing and Current > (B) Conductor Ampacity > (1) Before Application of Adjustment and Correction Factors
760.43 Special Conditions, NPLFA Circuit Overcurrent Protection
adjustment and correction factors of 310.15 to the ampacity calculation. Overcurrent protection shall not exceed 7 amperes for 18 AWG conductors and 10 ...
National Electrical Code 2017 of Kansas > 7 Special Conditions > 760 Fire Alarm Systems > 760.43 NPLFA Circuit Overcurrent Protection
725.1 Special Conditions, Scope
adjustment and correction factors, overcurrent protection, insulation requirements, and wiring methods and materials ...
National Electrical Code 2017 of Kansas > 7 Special Conditions > 725 Class 1, Class 2, and Class 3 Remote-Control, Signaling, and Power-Limited Circuits > 725.1 Scope
E3701.2 Branch Circuit and Feeder Requirements, Branch-Circuit and Feeder Ampacity
of any adjustment or correction factors, shall have an allowable ampacity equal to or greater than the noncontinuous load plus 125 percent ...
Residential Code 2018 of Kansas > 37 Branch Circuit and Feeder Requirements > E3701 General > E3701.2 Branch-Circuit and Feeder Ampacity