// CODE SNIPPET
B101.1 Adjusting Input
JUMP TO FULL CODE CHAPTER
The input rate of the burner shall
be adjusted to the value in accordance with the appliance
manufacturer's instructions. Firing at a rate in excess of the
nameplate rating shall be prohibited. The input rate shall be
adjusted by changing the size of a fixed orifice, changing the
adjustment of an adjustable orifice, or readjusting the appliance's
gas pressure regulator outlet pressure (where a regulator
is provided in the appliance). [NFPA 54:11.1.1]
Related Code Sections
B101.1 Procedures to Be Followed to Place Gas Equipment in Operation, Adjusting Input
The input rate of the burner shall
be adjusted to the value in accordance with the appliance
manufacturer's instructions. Firing at a rate in excess ...
Los Angeles Mechanical Code > B Procedures to Be Followed to Place Gas Equipment in Operation > B101.0 Adjusting the Burner Input > B101.1 Adjusting Input
B101.1 Procedures to Be Followed to Place Gas Equipment in Operation, Adjusting Input
The input rate of the burner shall
be adjusted to the value in accordance with the appliance
manufacturer's instructions. Firing at a rate in excess ...
Los Angeles Mechanical Code > B Procedures to Be Followed to Place Gas Equipment in Operation > B101.0 Adjusting the Burner Input > B101.1 Adjusting Input
C105.0 Installation and Testing of Oil (Liquid) Fuel-Fired Equipment, Placing Equipment in Operation
correct input of liquid fuel shall be determined, and the fuel-to-air ratio shall be
set. Each oil or liquid fuel burner shall be adjusted to its input ...
Los Angeles Mechanical Code > C Installation and Testing of Oil (Liquid) Fuel-Fired Equipment > C105.0 Placing Equipment in Operation
C105.0 Installation and Testing of Oil (Liquid) Fuel-Fired Equipment, Placing Equipment in Operation
correct input of liquid
fuel shall be determined and the fuel-to-air ratio shall be set.
Each oil or liquid fuel burner shall be adjusted to its input ...
Los Angeles Mechanical Code > C Installation and Testing of Oil (Liquid) Fuel-Fired Equipment > C105.0 Placing Equipment in Operation
C105.1 Installation and Testing of Oil (Liquid) Fuel-Fired Equipment, General
correct input of liquid
fuel shall be determined and the fuel-to-air ratio shall be set.
Each oil or liquid fuel burner shall be adjusted to its input ...
Los Angeles Mechanical Code > C Installation and Testing of Oil (Liquid) Fuel-Fired Equipment > C105.0 Placing Equipment in Operation > C105.1 General