// CODE SNIPPET
1910.217(c)(5) Additional Requirements for Safe-Guarding
JUMP TO FULL CODE CHAPTER
Where the operator feeds or removes parts by placing one or both hands in the point of operation, and a two hand control, presence sensing device, Type B gate or movable barrier (on a part revolution clutch) is used for safeguarding:
The employer shall use a control system and a brake monitor which comply with paragraphs (b) (13) and (14) of this section;
The control of air clutch machines shall be designed to prevent a significant increase in the normal stopping time due to a failure within the operating valve mechanism, and to inhibit further operation if such failure does occur, where a part revolution clutch is employed. The exception in paragraph (b)(7)(xi) of this section for controls manufactured and installed before August 31, 1971, is not applicable under this paragraph (c)(5).
Related Code Sections
1910.217(c)(5) Machinery and Machine Guarding, Additional Requirements for Safe-Guarding
Where the operator feeds or removes parts by placing one or both hands in the point of operation, and a two hand control, presence sensing device ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(c) Safeguarding the Point of Operation > 1910.217(c)(5) Additional Requirements for Safe-Guarding
1910.107(h)(10) Hazardous Materials, Guarding
that a safe isolation of the process is maintained from plant storage or personnel. Such railings, fencing, and guards shall be of conducting ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.107 Spray Finishing Using Flammable and Combustible Materials > 1910.107(h) Fixed Electrostatic Apparatus > 1910.107(h)(10) Guarding
1910.181(j)(1) Materials Handling and Storage, Guards
a hazard under normal operating conditions shall be guarded ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.181 Derricks > 1910.181(j) Other Requirements > 1910.181(j)(1) Guards
1910.266(f)(8) Special Industries, Guarding
with guarding to protect employees from flying wood chunks, logs, chips, bark, limbs and other material in accordance with the requirements of subpart O ...
OSHA 1910 General Industry > R Special Industries > 1910.266 Logging Operations > 1910.266(f) Machines > 1910.266(f)(8) Guarding
1910.252(a)(1)(ii) Welding, Cutting, and Brazing, Guards
If the object to be welded or cut cannot be moved and if all the fire hazards cannot be removed, then guards shall be used to confine the heat ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(a) Fire Prevention and Protection > 1910.252(a)(1) Basic Precautions > 1910.252(a)(1)(ii) Guards