UpCodes logo
// CODE SNIPPET

2107.6 ACI 530/ASCE 5/TMS 402, Section 2.1.10.7, Splices of Reinforcement

Go To Full Code Chapter
Modify Section 2.1.10.7 as follows:

2.1.10.7 Splices of reinforcement. Lap splices, welded splices or mechanical splices are permitted in accordance with the provisions of this section. All welding shall conform to AWS D1.4. Reinforcement larger than No. 9 (M #29) shall be spliced using mechanical connections in accordance with Section 2.1.10.7.3.

Related Code Sections

2107.6 Masonry, ACI 530/ASCE 5/TMS 402, Section 2.1.10.7, Splices of Reinforcement
Modify Section 2.1.10.7 as follows: 2.1.10.7 Splices of reinforcement. Lap splices, welded splices or mechanical splices are permitted ...
2106.1.1 Masonry, Basic Seismic-Force-Resisting System
be considered to contribute to the minimum reinforcement in Section 1.14.2.2.4 of ACI 530/ASCE 5/TMS 402. Tendons shall be located in cells that are grouted ...
Section 2108 Masonry, Strength Design of Masonry
of TMS 402/ACI 530/ASCE 5, except as modified by Sections 2108.2 through 2108.3. Exception: AAC masonry shall comply with the requirements of Chapters ...
2107.2.1 Masonry, Lap Splices
The minimum length of lap splices for reinforcing bars in tension or compression, ld, shall be (Equation 21-1) For SI: ld = 0.002dbfs ...
Section 2108 Masonry, Strength Design of Masonry
The design of masonry structures using strength design shall comply with Section 2106 and the requirements of Chapters 1 and 3 of ACI 530/ASCE 5/TMS ...