// CODE SNIPPET
1926.62(d)(9) Accuracy of Measurement
JUMP TO FULL CODE CHAPTER
The employer shall use a method of monitoring and analysis which has an accuracy (to a confidence level of 95 percent) of not less than plus or minus 25 percent for airborne concentrations of lead equal to or greater than 30 ug/m3.
Related Code Sections
1926.1126(d)(5) Toxic and Hazardous Substances, Accuracy of Measurement
that can measure chromium (VI) to within an accuracy of plus or minus 25 percent (25%) and can produce accurate measurements to within a statistical ...
OSHA 1926 Construction > Z Toxic and Hazardous Substances > 1926.1126 Chromium (VI) > 1926.1126(d) Exposure Determination > 1926.1126(d)(5) Accuracy of Measurement
1926.1127(d)(6) Toxic and Hazardous Substances, Accuracy of Measurement
The employer shall use a method of monitoring and analysis that has an accuracy of not less than plus or minus 25 percent (+ or - 25 percent ...
OSHA 1926 Construction > Z Toxic and Hazardous Substances > 1926.1127 Cadmium > 1926.1127(d) Exposure Monitoring > 1926.1127(d)(6) Accuracy of Measurement
1926.62(d)(9) Occupational Health and Environmental Controls, Accuracy of Measurement
The employer shall use a method of monitoring and analysis which has an accuracy (to a confidence level of 95 percent) of not less than plus or minus ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.62 Lead > 1926.62(d) Exposure Assessment > 1926.62(d)(9) Accuracy of Measurement
1926.1001(c)(2) Rollover Protective Structures; Overhead Protection,
W-1
Means to measure
Accuracy
Deflection of ROPS, inches
±5% of deflection measured.
Vehicle ...
OSHA 1926 Construction > W Rollover Protective Structures; Overhead Protection > 1926.1001 Minimum Performance Criteria for Rollover Protective Structures for Designated Scrapers, Loaders, Dozers, Graders, and Crawler Tractors > 1926.1001(c) Facilities and Apparatus > 1926.1001(c)(2)
1926.1124(d)(5) Toxic and Hazardous Substances, Methods of Sample Analysis
by a laboratory that can measure beryllium to an accuracy of plus or minus 25 percent within a statistical confidence level of 95 percent for airborne ...
OSHA 1926 Construction > Z Toxic and Hazardous Substances > 1926.1124 Beryllium > 1926.1124(d) Exposure Assessment— > 1926.1124(d)(5) Methods of Sample Analysis