// CODE SNIPPET
225.40 Access to Overcurrent Protective Devices
Related Code Sections
225.40 Wiring and Protection, Access to Overcurrent Protective Devices
Where a feeder overcurrent device is not readily accessible, branch-circuit overcurrent devices shall be installed on the load side, shall be mounted ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.40 Access to Overcurrent Protective Devices
692.9 Special Equipment, Overcurrent Protection
overcurrent devices shall not be required. Equipment and conductors connected to more than one electrical source shall be protected ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 692 Fuel Cell Systems > 692.9 Overcurrent Protection
240.24 Wiring and Protection, Location in or on Premises
ready access to all overcurrent devices protecting the conductors supplying that occupancy, unless otherwise permitted in 240.24(B)(1) and (2 ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.24 Location in or on Premises
(C) Special Equipment, Source and Output Circuits
A single overcurrent protective device, where required, shall be permitted to protect the PV modules, dc-to-dc converters, and conductors of each ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 690 Solar Photovoltaic (PV) Systems > 690.9 Overcurrent Protection > (C) Source and Output Circuits
(C) Special Conditions, Overcurrent Protection
their connection to the service outside of a building, they shall be protected by overcurrent devices in a readily accessible location outside the building ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 705 Interconnected Electric Power Production Sources > 705.11 Supply-Side Source Connections > (C) Overcurrent Protection