// CODE SNIPPET
514.4.8 Access Panels and Cover Plates
Related Code Sections
514.4.8 Exhaust Systems, Access Panels and Cover Plates
Where cleaning procedures are completed, access panels (doors) and cover plates shall be restored to their normal operational condition. [NFPA 96 ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 514.0 Procedures for the Use, Inspection, Testing, and Maintenance of Equipment > 514.4 Cleaning of Exhaust Systems > 514.4.8 Access Panels and Cover Plates
707.8 Sanitary Drainage, Access
Each cleanout, unless installed under an approved cover plate, shall be above grade, readily accessible, and so located as to serve the purpose ...
E3906.10 Power and Lighting Distribution, Covers and Plates
Covers and plates shall be nonmetallic or metal. Metal covers and plates shall be grounded. [314.25(A)] ...
Residential Code 2018 of Nevada > 39 Power and Lighting Distribution > E3906 Installation of Boxes, Conduit Bodies and Fittings > E3906.10 Covers and Plates
2308.6.4 Wood, Braced Wall Panel Construction
For Methods DWB, WSP, SFB, PBS, PCP and HPS, each panel must be not less than 48 inches (1219 mm) in length, covering three stud spaces where studs ...
Building Code 2018 of Nevada > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.6 Wall Bracing > 2308.6.4 Braced Wall Panel Construction
300.4 Wiring Methods and Materials, Protection Against Physical Damage
by a steel plate at least 1.6 mm ( 1 / 16 in.) thick, and of appropriate length and width, installed to cover the area of the wiring. The steel plate ...
National Electrical Code 2017 of Nevada > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.4 Protection Against Physical Damage