// CODE SNIPPET
[F] 907.7 Acceptance Tests and Completion
JUMP TO FULL CODE CHAPTER
Upon completion of the installation, the fire alarm system and all fire alarm components shall be tested in accordance with NFPA 72.
When the installation of the alarm devices is complete, each device and interconnecting wiring for multiple-station alarm devices shall be tested in accordance with the smoke alarm provisions of NFPA 72.
A record of completion in accordance with NFPA 72 verifying that the system has been installed and tested in accordance with the approved plans and specifications shall be provided.
Operating, testing and maintenance instructions and record drawings ("as-builts") and equipment specifications shall be provided at an approved location.
Related Code Sections
907.7 Fire Protection and Life Safety Systems, Acceptance Tests and Completion
Upon completion of the installation, the fire alarm system and all fire alarm components shall be tested in accordance with NFPA 72 ...
Building Code 2018 of Illinois > 9 Fire Protection and Life Safety Systems > 907 Fire Alarm and Detection Systems > 907.7 Acceptance Tests and Completion
(6) Wiring and Protection, Acceptance Tests
Complete acceptance tests shall be performed, after the substation installation is completed, on all assemblies, equipment, conductors, and control ...
National Electrical Code 2017 of Illinois > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.56 Inspections and Tests > (A) Pre-Energization and Operating Tests > (6) Acceptance Tests
701.3 Special Conditions, Tests and Maintenance
The authority having jurisdiction shall conduct or witness a test of the complete system upon installation ...
National Electrical Code 2017 of Illinois > 7 Special Conditions > 701 Legally Required Standby Systems > 701.3 Tests and Maintenance
708.6 Special Conditions, Testing and Maintenance
The authority having jurisdiction shall conduct or witness a test of the complete system upon installation and periodically afterward ...
National Electrical Code 2017 of Illinois > 7 Special Conditions > 708 Critical Operations Power Systems (COPS) > 708.6 Testing and Maintenance
909.18 Fire Protection and Life Safety Systems, Acceptance Testing
and after sufficient completion for the purposes of pressure-difference testing, flow measurements, and detection and control verification ...
Building Code 2018 of Illinois > 9 Fire Protection and Life Safety Systems > 909 Smoke Control Systems > 909.18 Acceptance Testing