// CODE SNIPPET
[F] 913.5 Acceptance Test
JUMP TO FULL CODE CHAPTER
Acceptance testing shall be done in accordance with the requirements of NFPA 20.
Related Code Sections
(6) Wiring and Protection, Acceptance Tests
Complete acceptance tests shall be performed, after the substation installation is completed, on all assemblies, equipment, conductors, and control ...
National Electrical Code 2017 of Illinois > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.56 Inspections and Tests > (A) Pre-Energization and Operating Tests > (6) Acceptance Tests
(6) Wiring and Protection, Acceptance Tests
Complete acceptance tests shall be performed, after the substation installation is completed, on all assemblies, equipment, conductors, and control ...
National Electrical Code 2020 of Illinois > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.56 Inspections and Tests > (A) Pre-Energization and Operating Tests > (6) Acceptance Tests
901.5 Fire Protection and Life Safety Systems, Acceptance Tests
Fire protection systems shall be tested in accordance with the requirements of this code and the International Fire Code . Where required ...
Building Code 2021 of Illinois > 9 Fire Protection and Life Safety Systems > 901 General > 901.5 Acceptance Tests
901.5 Fire Protection and Life Safety Systems, Acceptance Tests
Fire protection systems shall be tested in accordance with the requirements of this code and the International Fire Code . Where required ...
Building Code 2018 of Illinois > 9 Fire Protection and Life Safety Systems > 901 General > 901.5 Acceptance Tests
909.18 Fire Protection and Life Safety Systems, Acceptance Testing
Devices, equipment, components and sequences shall be individually tested. These tests, in addition to those required by other provisions ...
Building Code 2021 of Illinois > 9 Fire Protection and Life Safety Systems > 909 Smoke Control Systems > 909.18 Acceptance Testing