// CODE SNIPPET
2220.127.116.11 Absorption Requirements
JUMP TO FULL CODE CHAPTER
A 4-inch (102 mm) cube, cut from a stabilized adobe unit dried to a constant weight in a ventilated oven at 212°F to 239°F (100°C to 115°C), shall not absorb more than 21/2 percent moisture by weight when placed on a constantly water-saturated, porous surface for seven days. Not fewer than five specimens shall be tested and each specimen shall be cut from a separate unit.
Related Code Sections
218.104.22.168 Masonry, Absorption Requirements
A 4-inch (102 mm) cube, cut from a stabilized adobe unit dried to a constant weight in a ventilated oven at 212°F to 239°F (100°C to 115°C), shall ...
Building Code 2018 of Illinois > 21 Masonry > 2109 Empirical Design of Adobe Masonry > 2109.2 Adobe Construction > 2109.2.2 Stabilized Adobe > 222.214.171.124 Absorption Requirements
2607.1 Plastic, General
, light-transmitting plastics shall be permitted to be used as wall panels in exterior walls , provided that the walls are not required to have a fire ...
Building Code 2018 of Illinois > 26 Plastic > 2607 Light-Transmitting Plastic Wall Panels > 2607.1 General
126.96.36.199.3 Building Envelope,
Insulation materials in ground contact shall have a water absorption rate no greater than 0.3% when tested in accordance with ASTM C272 ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > 5 Building Envelope > 5.8 Product Information and Installation Requirements > 5.8.1 Insulation > 188.8.131.52 Insulation Protection > 184.108.40.206.3
G220.127.116.11 Normative Appendix G Performance Rating Method, Type and Number of Chillers (Systems 7, 8,11,12, and 13)
Electric chillers shall be used in the baseline building design regardless of the cooling energy source, e.g. direct-fired absorption ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > Normative Appendix G Performance Rating Method > G3 Calculation of the Proposed Design and Baseline Building Performance > G3.1 Building Performance Calculations > G3.1.3 System-Specific Baseline HVAC System Requirements > G18.104.22.168 Type and Number of Chillers (Systems 7, 8,11,12, and 13)
C407.5.1 [CE] Commercial Energy Efficiency, Building Specifications
Gross area: same as proposed As proposed U -factor: as specified in Table C402.1.4 As proposed Solar absorptance: 0.75 As proposed ...
2018 Illinois Energy Conservation Code Standards for Privately Funded Commercial Facilities and Standards for Residential Buildings > 4 [CE] Commercial Energy Efficiency > C407 Total Building Performance > C407.5 Calculation Procedure > C407.5.1 Building Specifications