// CODE SNIPPET
P-1103.4.1 Above Roof
JUMP TO FULL CODE CHAPTER
Extensions of vent pipes through a roof shall be terminated at least 2 feet above the roof surface and shall be properly flashed. Where the roof is used for any purpose other than weather protection, the vent pipe shall extend at least 7 feet above the roof surface and shall be properly supported.
Related Code Sections
E3604.2.1 Services, Above Roofs
Conductors shall have a vertical clearance of not less than 8 feet (2438 mm) above the roof surface. The vertical clearance above the roof level ...
2018 Philadelphia Residential Code > 36 Services > E3604 Overhead Service and Service-Entrance Conductor Installation > E3604.2 Vertical Clearances > E3604.2.1 Above Roofs
P-1103.4.1 Vents and Venting, Above Roof
Extensions of vent pipes through a roof shall be terminated at least 2 feet above the roof surface and shall be properly flashed. Where the roof ...
Philadelphia Plumbing Code > 11 Vents and Venting > P-1103 Protection of Trap Seals > P-1103.4 Location of Vent Terminals > P-1103.4.1 Above Roof
1510.2.1 Roof Assemblies and Rooftop Structures, Height Above Roof Deck
Penthouses constructed on buildings of other than Type I construction shall not exceed 18 feet (5486 mm) in height above the roof deck as measured ...
2018 Philadelphia Building Code > 15 Roof Assemblies and Rooftop Structures > 1510 Rooftop Structures > 1510.2 Penthouses > 1510.2.1 Height Above Roof Deck
506.3.13.1 Exhaust Systems, Termination Above the Roof
Exhaust outlets that terminate above the roof shall have the discharge opening located not less than 40 inches (1016 mm) above the roof surface ...
2018 Philadelphia Mechanical Code > 5 Exhaust Systems > 506 Commercial Kitchen Hood Ventilation System Ducts and Exhaust Equipment > 506.3 Ducts Serving Type I Hoods > 506.3.13 Exhaust Outlets Serving Type I Hoods > 506.3.13.1 Termination Above the Roof