UpCodes logo
// CODE SNIPPET

Article 3 Abbreviations

Jump To Full Code Chapter
§27-233 Abbreviations
bhp: brake horsepower
mph: miles per hour
Btu: british thermal unit
oz.: ounce
C: centigrade
P.C.E.: pyrometric cone
cfm: cubic feet per minute equivalent
cps: cycles per second
pcf: pounds per cubic foot
cu. ft.: cubic feet
plf: pounds per linear foot
db: decibel
psf: pounds per square foot
dia.: diameter
psi: pounds per square inch
F: fahrenheit
psia: pounds per square inch fpm: feet per minute absolute
fps: feet per second
psig: pounds per square inch fsp: fire standpipe gauge
ft.: foot
rpm: revolutions per minute
gal.: gallon
sec: second
gpm: gallons per minute
swp: steam working pressure
gps: gallons per second
sq. ft: square foot
h.p.: horsepower
sq. in.: square inch
hr.: hour
sq. yd.: square yard
in.: inch
INR: impact noise rating
Tag: tagliabue
I.P.S.: iron pipe size
wwp: water working pressure
lb.: pound

Note: For abbreviation of name of referenced national organizations, see reference standard RS 2-1.

Related Code Sections

Article 3 Definitions, Abbreviations
I.P.S.: iron pipe size wwp: water working pressure lb.: pound Note: For abbreviation of name of referenced national organizations, see ...
1.6.2 Administration, Hydraulic Symbols
The standard abbreviations in Table 1.6.2 shall be used on the hydraulic calculation form discussed in Chapter 23. Table 1.6.2 Hydraulic Symbols ...
Reference Standard 2 Definitions [PDF] (page 1)
following agencies and national organizations promulgate standards referenced in this code and its referenced standards. The abbreviations in front ...
916.1.1 Fire Protection Systems, Construction Documents
and all other critical system components such as antennas, amplifiers, cables as applicable. Legend of all ARCS symbols and abbreviations used ...
*917.1.1 Fire Protection Systems, Construction Documents
and abbreviations used. Location of primary and secondary power source. Specification and listing details for all equipment, devices and cables ...