// CODE SNIPPET
(D) 1000 Volts Between Conductors
Related Code Sections
(D) Wiring and Protection, 1000 Volts Between Conductors
Circuits exceeding 277 volts, nominal, to ground and not exceeding 1000 volts, nominal, between conductors shall be permitted to supply the auxiliary ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.7 Lighting Equipment Installed Outdoors > (D) 1000 Volts Between Conductors
(A) Special Equipment, Isolated Circuits
transformers. Primaries of such transformers shall operate at not more than 1000 volts between conductors and shall be provided with proper overcurrent ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 668 Electrolytic Cells > 668.21 Power-Supply Circuits and Receptacles for Portable Electrical Equipment > (A) Isolated Circuits
(A) General, Live Parts Guarded Against Accidental Contact
minimum of 2.62 m (8 ft 7 in.) for 601 volts to 1000 volts between ungrounded conductors ...
National Electrical Code 2020 of Minnesota > 1 General > 110 Requirements for Electrical Installations > 110.27 Guarding of Live Parts > (A) Live Parts Guarded Against Accidental Contact
712.80 Special Conditions, General
Systems with a maximum voltage between conductors of over 1000 volts dc shall comply with Article 490 and other requirements in this Code ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 712 Direct Current Microgrids > 712.80 General
Article 399 Wiring Methods and Materials, Outdoor Overhead Conductors Over 1000 Volts
This article covers the use and installation for outdoor overhead conductors over 1000 volts, nominal ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 399 Outdoor Overhead Conductors Over 1000 Volts