UpCodes logo
An arrangement of individual stationary storage batteries in close proximity to each other, mounted on storage racks or in modules, battery cabinets or other enclosures.
Go To Full Code Chapter

Related Code Sections

1206.2.8.3 Energy Systems, Stationary Battery Arrays
into stationary battery arrays not exceeding 50 kWh (180 megajoules) each. Each stationary battery array shall be spaced not less than 3 feet (914 mm) from ...
Section 1202 Energy Systems, Definitions
The following terms are defined in Chapter 2: BATTERY SYSTEM, STATIONARY STORAGE. BATTERY TYPES. Lead-acid battery. CAPACITOR ARRAY ...
1206.2.3.1 Energy Systems, Fault Condition
Only single-failure modes shall be considered. Thermal runaway condition in a single-battery storage rack, module or array. Failure of any energy ...
1206.2.3 Energy Systems, Hazard Mitigation Analysis
any of the following conditions: Battery technologies not specifically identified in Table 1206.2 are provided. More than one stationary storage ...
105.7.2 Scope and Administration, Battery Systems
A construction permit is required to install stationary storage battery systems regulated by Section 1206.2 ...