UpCodes logo

Related Code Sections

104.1 Application and Administration, Dimensions
are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions ...
104.1 Application and Administration, Dimensions
are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute ...
6.9.5 Structural Analysis,
The cross-sectional dimensions of each member used in an analysis shall be within 10 percent of the specified member dimensions in construction ...
R606.3.1 Wall Construction, Bed and Head Joints
thickness for loadbearing masonry shall be within the following tolerances from the specified dimensions: Bed joint: + 1/8 inch (3.2 mm). Head ...
R606.3.1 Wall Construction, Bed and Head Joints
thickness for load-bearing masonry shall be within the following tolerances from the specified dimensions: Bed joint: + 1/8 inch (3.2 mm). Head ...