// DEFINITION

Plain Masonry Masonry

Building Code 2015 of Alabama > 2 Definitions > 202 Definitions

Plain masonry. Masonry in which the tensile resistance of the masonry is taken into consideration and the effects of stresses in reinforcement are neglected.

Go To Full Code Chapter

Related Code Sections

Section 2102 Masonry, Definitions and Notations

FOUNDATION PIER. HEAD JOINT. MASONRY. Glass unit masonry. Plain masonry. Reinforced masonry. Solid masonry ...

Building Code 2015 of Alabama > 21 Masonry > 2102 Definitions and Notations

Section 2102 Masonry, Definitions and Notations

or strap that secures masonry to its structural support. ARCHITECTURAL TERRA COTTA. Plain or ornamental hard-burned modified clay units, larger ...

Building Code 2009 of Alabama > 21 Masonry > 2102 Definitions and Notations

R404.1.4.1 Foundations, Masonry Foundation Walls

with this section. In addition to the requirements of Table R404.1.1(1), plain masonry foundation walls shall comply with the following: Wall height shall ...

Residential Code 2015 of Alabama > 4 Foundations > R404 Foundation and Retaining Walls > R404.1 Concrete and Masonry Foundation Walls > R404.1.4 Seismic Design Category D0, D1 or D2 > R404.1.4.1 Masonry Foundation Walls

315.7.6 General Requirements, Pile Separation Distances

Masonry ...

Fire Code 2021 of Alabama > 3 General Requirements > 315 General Storage > 315.7 Outdoor Pallet Storage > 315.7.6 Pile Separation Distances

R322.2.3 Building Planning, Foundation Design and Construction

designed in accordance with Section R404: The unsupported height of 6-inch (152 mm) plain masonry walls shall be not more than 3 feet (914 mm). The ...

Residential Code 2015 of Alabama > 3 Building Planning > R322 Flood-Resistant Construction > R322.2 Flood Hazard Areas (Including A Zones) > R322.2.3 Foundation Design and Construction