// DEFINITION
Continuous Mode
where the frequency of demands for operation made on a safety-related system is greater than one per year or greater than twice the proof-test frequency
Related Code Sections
27.5.5.1.1.6 Public Emergency Alarm Reporting Systems,
The polling devices shall be configured for automatic cycle initiation in their primary operating mode, shall be capable of continuous self ...
8.4.10.1.3 General Requirements, Elevator Operation, Seismic Detection Device Actuation (See Figure 8.4.10.1.3)
STATUS" visual indication(s) provided at each operating station (see 2.26.1.4.1) shall be set to illuminate continuously and the "EARTHQUAKE MODE ...
Safety Code for Elevators and Escalators 2019 of Illinois > 8 General Requirements > 8.4 Elevator Seismic Requirements > 8.4.10 Emergency Operation and Signaling Devices > 8.4.10.1 Operation of Elevators Under Earthquake Emergency Conditions > 8.4.10.1.3 Elevator Operation, Seismic Detection Device Actuation (See Figure 8.4.10.1.3)
(D) Special Conditions, Bypass Isolation Automatic Transfer Switches
maintenance as required in 708.6(C) without jeopardizing continuity of power. When the bypass isolation transfer switch is in the bypass mode, either ...
6.4.3.3.5.1 Heating, Ventilating, and Air Conditioning, Guest Room HVAC Set-Point Control
in the cooling mode and automatically lowered by at least 4°F from the occupant set point in the heating mode. When the guest room is unrented ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > 6 Heating, Ventilating, and Air Conditioning > 6.4 Mandatory Provisions > 6.4.3 Controls and Diagnostics > 6.4.3.3 Off-Hour Controls > 6.4.3.3.5 Automatic Control of HVAC in Hotel/Motel Guest Rooms > 6.4.3.3.5.1 Guest Room HVAC Set-Point Control
10.4.3.3 Other Equipment, Standby Mode
When stopped and unoccupied with doors closed for over 15 minutes, cab interior lighting and ventilation shall be de-energized until required ...